Code: HS2-4
TSURUMI HS2-4 2” Submersible Water Pump
The HS industrial series are heavy duty, yet lightweight, contractor pumps.
Features:
-With a side outlet arrangement, this design also has an integral stirring device, which combine to reduce blockages when used in very dirty site water.
-Available with or without a float switch.
-The HS series are 50mm (2”) and an 80mm (3”) submersible pumps with motor sizes in 400wattand 750watt.
-The models HS2.75S and HS3.75S offer increased head and flow capability over the HS2.4S. All models have a solid cast aluminium body, cast iron pump casing and an impact resistant PVC strainer base for durability during robust handling.
-The urethane vortex impeller offers excellent wear resistance in site applications where water contains sand and silt in suspension, thus maintaining performance and reliability.
-The 750watt pumps feature an oil lifter to maintain seal lubrication during operation in any position.
-All models have a 403 stainless steel shaft, that is fitted with an ultra hardwearing, double mechanical seal (inboard: silicon carbide - silicon carbide) – which runs in an oil chamber - and have a stirring device to reduce blockages.
-Used predominantly as contractor pumps on site drainage duties, they can also be used in other industrial applications.
-Supplied with 10 metres of heavy duty, rubber power cable.
-Available in single-phase only with an optional float switch.
| Model | HS2.4S - 110V/230V |
|---|---|
| Length (mm) | 341 |
| Height (mm) | 328 |
| Manual / Auto | Manual/Auto |
| Outlet (mm) | 50 |
| kW | 0.4 |
| Volts | 110V/230V |
| Flow (l/min) | 205 |
| Head (metres) | 12 |
| Free Passage (mm) | 7 |
| Width (mm) | 185 |
| Dry weight (kg) | 11.3/11.7 |
| Packing weight | 13.5/13.6 |